WALKIE TALKIE
This feature allows a pair of handsets to be used like walkie talkies (electrical power to the base unit is not required for walkie talkie operation). This setting may be made with the handset only.
1.Make sure your handset is at the main menu. If your handset is not in the main menu, press the MENU soft key.
2.Press the cid/vol (up or down arrow) button to move the arrow to
WALKIE TALKIE.
DEREGISTRATION
WALKIE TALKIE
OKEXIT
3.Press the OK soft key and WALKIETALKIE ENABLE? shows in the display.
WALKIE TALKIE
ENABLE ?
OKEXIT
4.Press the OK soft key and WALKIETALKIE ENABLED followed by WALKIE TALKIE HANDSET# shows in the display.
WALKIE TALKIEWALKIE TALKIE
ENABLEDHANDSET1EXIT
NOTE: Both handsets must be in walkie talkie mode to send and receive.
5.Press the page/int button, and then enter the handset number/extension you want to call. The selected handset is paged. When the page/int button on the receiving handset is pressed, and the page is answered, the walkie talkie feature is activated between both handsets. Both handsets display WALKIETALKIE WITH HANDSET #.
23