RCA 21011 manual Replacing the Battery

Page 51

REPLACING THE BATTERY

CAUTION: To reduce the risk of fire or personal injury, use only the battery 5-2459 that is compatible with this unit.

Make sure the telephone is OFF (not in talk mode) before you replace battery.

1.Remove the battery compartment cover.

2.Disconnect the cord attached to the battery pack from the jack inside the battery compartment and remove the battery pack from the handset.

3. Insert the new battery pack and reconnect the battery plug.

4. Put the battery compartment cover back on.

5. Place handset in the base to charge. If you don’t charge the handset battery properly (for 12 hours) when you first set up the phone and/or when you install a new battery pack, the battery’s long-term performance will be compromised.

BATTERY SAFETY PRECAUTIONS

•Do not burn, disassemble, mutilate, or puncture. Like other batteries of this type, toxic materials could be released which can cause injury.

•Keep batteries out of the reach of children.

•Remove batteries if storing over 30 days.

NOTE: The RBRC seal on the battery used in your ATLINKS USA, Inc. product indicates that we are participating in a program to collect and recycle Nickel Cadmium batteries throughout the United States. Please call 1-800-8-BATTERY for information or contact your local recycling center.

51

Image 51

Contents 21011 Notification to the LocalTelephone Company Equipment Approval InformationTable of Contents Savethese Instructions Introduction FeaturesYour Caller ID Call Waiting phone allows you to Base Layout Handset and Charge Cradle LayoutMake sure your package includes the items shown here Before YOU BeginImportant Installation Information Installing the Phone Installing the Handset Battery Telephone Setup Language AreacodeOkexit Exit EnglishSetlanguage 1ENG 2FRA 3ESP Language ContrastContrast Areacode RingertoneSET Areacode Ringer Tone Languageareacode AreacoderingertoneRinger Tone Tone / Pulse TimeSET Tone / Pulse 1 Tone 2 Pulse Okexit Ringertone Registration ToneHold Basepage Wait for Beep Confirm Registration ?Handset Registered Handsetneedsregister Registrationhandset ?Billsmith Handset Enter Name BillsmithMenudir Movenear Tobase Deregistration WalkietalkieDE-REGISTER Handset 1 ? Confirm Deregistration ? Handset DeregisteredWalkie Talkie Enable ? Walkie Talkiewalkie Talkie ENABLEDHANDSET1EXITDeregistration Walkie Talkie Walkie Talkie With Handset # Handset # DisabledWalkie Talkie HANDSET# Walkie Talkie Extension ?SET Time TONE/PULSE TimeDefaultsetting Defaultsetting LanguageDefaultsetting YES 2NO DefaultsettingBasic Operation Making a Call Handset Name Handset Ringer onRinger High HI 2LOW 3OFF Ringer LOWNEW CALL00 Conf Trans Exit Line on HoldMute Hold DIR Line ActivePaging Extension ? Paging HandsetLine on Hold Extension ? Pagingfrom HANDSET1Pagingfrom Handset PAGING/LINEONHOLD SteveMute on Temporary Tone Dialing Paging PagingfromMute Receiving AN Intercom Call PAGING/LINEONHOLD HANDSET1Line on HOLD/INTERCOM Select Memory Edit DEL ExitMemory Menu DIR Enter TelnumbrStoring a Redial Number Delete ? Peter ChanDialing a Stored Number Handset 000000000000000 Receiving and Storing Call Records You may transfer a Caller ID record to your phone ’s memory Save DEL ExitReplace MEMO? Eleven digits Deleted Delete Call ID?Delete ALL ? No CallsReplacing the Battery Headset and Belt Clip Installation Incomplete Data Display MessagesTroubleshooting Guide Handset Sound SignalsPage Caller ID Solutions General Product Care Causes of Poor Reception ServiceIndex Page Orcompletethisorderform For how long after your purchase Limited Warranty