Storing a Number in Memory

Your ST88244 phone has 10 memory locations for storing important telephone numbers.

1. Remove the

handset from the

base and press

MEM. The

LED flashes.

NOTE: You have 30 seconds after pressing MEM to enter the number you wish to store. Otherwise, an error tone will sound.

2.Enter the phone number you want to store (up to 20 digits).

3.Press MEM and enter a number (0-9) on the keypad for the memory location or SPEED DIAL you want to use.

You hear a long beep and the

TALK/BATT LOW LED goes out indicating the number has been stored successfully.

If you enter a number in a location that has a previously stored number, it will overwrite the existing number without warning.

Entering a Pause in

The pause feature is useful for long distance calling, credit card dialing, or sequences that require a pause between digits.

To use this function, press PAUSE/REDIAL on the handset in the phone number sequence at steps

1 and 2 in “Storing a Number in

Memory”.

NOTE: Remember, the phone number you wish to store cannot have more than 20 digits, including the pause. (The PAUSE button counts as one digit.)

Follow step 3 in the “Storing a Number in Memory” section to complete the operation.

If your phone is set up for pulse dialing, you can store a mixed mode number (up to 20 digits) to easily access long distance services.

1.Remove the handset from the base

and press MEM. The TALK/BATT LOW

LED flashes.

2.Enter the number to be dialed in pulse mode.

3.Press the

*/TONE button

on the handset.

5.Press MEM and a number (0-9) on the keypad for the memory location you wish to use. You hear a long beep and the

TALK/BATT LOW LED goes out.

To dial a phone number stored in memory, press TALK, then press MEM and the memory location (0-9). Your phone will dial the stored number.

NOTE: If you select a memory location that does not have a stored number, the handset will beep rapidly and the phone will not dial.