(SPEED DIAL)
Your phone is equipped with
(See “Storing a Number in Memory”.)
To instantly dial the phone number stored in speed memory location, simply press SPEED DIAL. (There is no need to press TALK. The phone will automatically dial.)
If you press SPEED DIAL and a phone number is not stored in speed memory location, the phone will beep rapidly and will not dial.
Chain Dialing
After dialing a number you may be requested to enter a special access code, for example, when performing a banking transaction.
1.Dial the main number.
2.Press MEM and the memory location number
Erasing a Stored Number
1. Remove the handset from the base.
2. Press MEM twice.
3. Press the memory location number
DIAL you want to
clear. You hear a long beep confirming that you have erased the number.
Selecting a Different
Channel
If you encounter interference while using your phone, you can manually change the phone’s channel for clear operation. Interference can come from appliances or other phones in your home. This function works only when the phone is in use.
The CH button on the handset allows you to choose between 20 factory set channels. During the course of a conversation, if you hear static or noise which makes it difficult to hear, press CH. The TALK/BATT LOW LED flashes, indicating the phone is changing to another channel.
Using the Flash Button
Use FLASH for accessing services such as call waiting. (You must subscribe to Call Waiting Service from your phone company to use this feature.) If you receive a call during your conversation, press FLASH on the handset. Press FLASH again to return to the previous call.
Using the Page Feature
The Page feature sends a signal from the base to the handset causing it to beep.
This is useful for locating the handset when it is away from the base. To use
this feature, press
PAGE
PAGE on the base.
The handset beeps for 60 seconds.
NOTE: Paging is also cancelled when incoming call is received.
To end the page, press any key on the handset or PAGE on the base, or return the handset to the base.
Traveling Out-of-Range
As you begin to move too far from the base unit, you hear a clicking sound. As you travel further, the noise increases. If you travel
8