RCA 26970 manual Service, Caller ID

CALLER ID

Problem	Solution
No Display	•	Is battery fully charged? Try replacing the battery.
	•	If you are using AC power, make sure that the unit is
		connected to a non-switched electrical outlet. Disconnect the
		unit from the plug and plug it in again.
	•	Did you order Caller ID service from your local telephone
		company? The display won't work unless you order Caller ID
		service from your phone company.
Caller ID Error Message	•	The unit displays this message if it detects anything other
		than valid Caller ID information during the silent period after
		the first ring. This message indicates either the presence of
		noises on the line, or that an invalid message has been sent
		from the telephone company.

SERVICE

The FCC requires this product to be serviced only by the manufacturer or its authorized service agents. In accordance with FCC requirements, changes or modifications not expressly approved by ATLINKS USA could void the user’s authority to operate this product. For instructions on how to obtain service, refer to the warranty included in this Guide.

Attach your sales receipt to the booklet for future reference or jot down the date this product was purchased or received as a gift. This information will be valuable if service should be required during the warranty period.

Purchase date ________________ Name of store ___________________________

26