Radio Shack TAD-705 Connecting AN Optional Headset, Dialing a Memory Number, Chain-Dialing

Page 14
HEADSET/SPEAKER-

43-705.fm Page 14 Tuesday, May 23, 2000 8:54 AM

Dialing a Memory Number

To dial a number stored in memory, lift the handset or press

PHONE, then press the desired memory loca- tion button. Or you can press the desired memory location button then press DIAL.

Chain-Dialing

For quick recall of numbers for special ser- vices (such as bank-by-phone or alternate long-distance), you can store each group of numbers in its own memory location. Then, when calling special services, dial the ser- vice's main number first. At the appropriate place in the call, press the memory location button for the additional numbers you want to send.

Testing Stored Emergency Num- bers

If you store an emergency service's number (police department, fire department, ambu- lance) and you want to test the stored num- ber, make the test call during the late evening or early morning hours to avoid peak demand periods. Remain on the line to ex- plain the reason for your call.

CONNECTING AN

OPTIONAL HEADSET

Your TAD is equipped with a headset jack on the base. The jack allows you to connect an optional headset so you move around within the headset cord's length.

Follow these steps to use a headset:

1.Insert the headset's 3/32-inch (2.5 mm)

plug into the jack on the right side of the base.

2.Place the headset on your head with the earpiece over either ear and adjust the

microphone boom until it is about even with your chin.

3.Press HEADSET/SPEAKERPHONE to make or receive calls. == HEADSET == displays.

4.When you finish the conversation, press

HEADSET/SPEAKERPHONE to hang up.

Note: You cannot use the speakerphone with a headset connected to the TAD.

14

Telephone Operation

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Page 13 Page 15
Image 14
Page 13 Page 15
Contents TAD-705 Memory Speakerphone Contents Troubleshooting Caller ID OperationFCC Statement Read this Before InstallationImportant Caller ID Information FCC Wants YOU to KnowFeatures Telephone FeaturesCaller ID Features Programmable Remote Operation SecuriMounting the TAD Installing a Backup BatteryPreparation On a Desk On a Wall or Wall PlateSetting the Display Contrast Setting the Dialing ModeSetting the Ringer Setting the Long Distance CodeSetting the DAY, Time and Date Setting the Number of RingsTelephone Operation Switching Between the Handset and the SpeakerphoneAdjusting the Volume Using Hold Using RedialUsing Flash Using PrivacyEntering a Pause A Memory Number Storing a Number in MemoryStoring Numbers from Caller ID Records Reviewing Memory NumbersDialing a Memory Number Connecting AN Optional HeadsetTesting Stored Emergency Num- bers Chain-DialingRecording the Outgoing Messages Setting the TAD to Answer CallsTAD Operation Checking the Outgoing MessagesAnnounce Only Incoming Message RecordingPlaying Messages Recording a Memo Recording a ConversationScreening Calls Using Call BreakthroughDeleting Messages Changing the CBT CodeRemote Command List Using the TOLL-SAVERUsing Remote Commands Changing the Remote Operation Security CodeHave no announcement two Caller ID Operation Caller ID Messages Reviewing Caller ID RecordsDeleting Call Records VIP Call ListDialing Number Selections Setting the VIP AlertUsing Dial Different Area CodeFm Page 25 Tuesday, May 23, 2000 854 AM Troubleshooting Problem SuggestionResetting the TAD CareLimited One-Year Warranty
Top Page Image Contents