Radio Shack 43-3577 owner manual Choosing the Dialing Mode

Page 12

Installation

Ô NOTES Ô

•Make sure your battery pack is fully charged before choosing the dialing mode.

•If your phone system requires pulse dialing and you need to send the DTMF tones for certain situations during a call, you may switch over to tone dialing. (Refer to “Tone Dialing Switch-over” on

Page 15.)

CHOOSING THE DIALING MODE

Most phone systems use tone dialing which sends DTMF tones through the phone lines. However, some phone systems (such as those in rural areas) still use pulse dialing. The default setting is tone dialing. Depending on your dialing system, set the mode as follows: Ô

Dialing mode switch is next to the DC IN 9V jack at the top of the base. Place the switch in the TONE position for tone dialing, or the PULSE position for pulse dialing.

If you are not sure of your dialing system, set for tone dialing. Make a trial call. If the call connects, leave the setting as is. Otherwise set for pulse dialing.

12

Image 12

Contents MHz Cordless Telephone Caller ID/Call Waiting IDContents Introduction Information FCC StatementSurge Protection Important Safety Instructions Save These InstructionsInstallation Important Caller ID InformationSelecting a Location On a Desk TOP 9V DC and delivers at leastOn a Wall Plate or Wall Setting the Visual Ringer Brightness CONNECTING/CHARGING the Battery PackInstallation Choosing the Dialing Mode Operation Making and Receiving CallsAdjusting the Ringer and Earpiece Volume RedialTone Dialing SWITCH-OVER Traveling OUT-OF-RANGESelecting a Different Channel Voice Mail Waiting Indicator Setting Menu OptionsFlash and Call Waiting Setting the Language Changing the Auto Talk and CidcwEntering Your Area Code Memory Dialing Storing Phone Numbers and NamesMemory Dialing Steps for Entering Names and Special Characters Memory Dialing from Standby Mode Memory Dialing from Talk ModeIf you make a mistake while entering a name Making Calls with Memory DialingChain Dialing Editing a Stored Name AND/ or Phone NumberErasing a Stored Name and Phone Number Press SELECT. The confirmation screen appearsTesting Stored Emergency Numbers ONE-TOUCH Emergency DialStoring and Editing the Emergency Dial Making Calls with the Emergency Dial Deleting the Emergency DialWhen the Telephone Rings Caller IDViewing the Caller ID Message List Deleting Information from the Caller ID ListDeleting a Caller ID Message Using the Caller ID List Long Distance Calls and Area Code Setting/CancellationDeleting all Caller ID Names/Numbers Calling a Party from the Caller ID ListInstalling the Beltclip Headset InstallationAdditional Information To attach the beltclipTroubleshooting Problem SolutionService and Repair CareRadioShack Corporation