•Use #/ 
and 
/TONE/ 
to move the cursor to the desired location.
•Use DEL/CH to delete characters as needed.
•Press and hold DEL/CH to delete all the characters.
•If a name is not required, go to step 6.
6.Press SELECT. ¨Store Number¨ is displayed.
The cursor flashes indicating that the display is ready for the number to be entered.
7.Use the number keys to enter the phone number.
•The phone number cannot exceed 20 digits.
•Use REDIAL to enter a pause in the dialing sequence. The display shows a ¨P¨. Each pause counts as one digit and represents a
two second delay of time between the digits. Ô
•Use DEL/CH to delete digits as needed.
8.Press SELECT. You will hear a confirmation tone. Memory storage is complete. For example, if you store a name and number into memory location number 1, the display shows ¨Memory 1 Stored¨.
After about two seconds, the Select Memory screen is displayed.
Repeat steps 2 - 8 to store more numbers.
9.Press MEM to return to the standby mode.
Ô NOTE Ô
The pause feature is useful for long distance calling, credit card dialing, or sequences that require a pause between digits.
Memory Dialing
19