Radio Shack TAD-1024 owner manual Remote Operation, Remote ANSWER-ON

Page 17

43-784.fm Page 17 Monday, August 16, 1999 7:47 AM

REMOTE OPERATION

You can operate the TAD from almost any touch-tone phone, or from a rotary phone using a pocket tone-dialer (avail- able at your local RadioShack store).

Notes:

When the memory is full, the TAD answers the call after eight rings and plays OGM 2 (the announce- ment-only message).

To bypass the outgoing message and begin recording a message im- mediately when you call the TAD from a remote phone, you can press # during the announcement. The TAD skips the rest of the an- nouncement, beeps once, and be- gins recording.

If the TAD is set to toll saver, it an- swers after two rings if you have new messages (ones you have not played). If there are no new mes- sages, the TAD waits for four rings before it answers. This gives you time to hang up before the TAD an- swers so you can avoid unneces- sary long-distance charges. See “Setting the Number of Rings” on Page 10.

REMOTE ANSWER-ON

Note: An outgoing message must be re- corded before you can remotely set the TAD to answer calls.

To set the TAD to answer calls, dial your phone number. The TAD answers the call after 10 rings and sounds two beeps.

Enter the remote operation security code within 8 seconds. The TAD sounds one long and one short beep and plays the OGM 1 message.

You can hang up at this point and the TAD is set to answer calls. Or, you can now enter other remote command(s).

If the TAD records over 8 seconds of si- lence, it automatically disconnects.

17

Image 17
Contents TAD-1024 Features Fm Page 3 Monday, August 16, 1999 747 AM FCC Statement Read this Before InstallationContents Selecting a Location InstallationConnecting Power Installing Backup Battery Preparation Setting the DAY TimeRecording the Outgoing Messages Setting the Number of Rings Recording Incoming Messages Setting the TAD to Answer CallsBasic Operation Playing Messages Screening CallsDeleting Messages Recording a Conversation Recording a MemoChanging the CBT Code Using Call BREAK- ThroughChanging the Remote Operation Security Code Remote ANSWER-ON Remote OperationPress Using Remote CommandsProblem Remedy TroubleshootingResetting the TAD Care and Maintenance Lightning FCC Wants YOU to KnowFm Page 22 Monday, August 16, 1999 747 AM Fm Page 23 Monday, August 16, 1999 747 AM Limited One-Year Warranty