USING REMOTE
COMMANDS
To use the remote commands, you must enter the remote operation security code within 8 seconds after the TAD answers the call. After the TAD beeps once to verify you entered the code correctly, enter the number(s) for the function(s) you want the TAD to perform.
Press: | To: |
|
|
|
|
00 | Turn the TAD off. |
|
|
01 | Turn the TAD on. The TAD beeps |
| and plays OGM 1. (TAD is set to |
| play OGM 1.) |
|
|
02 | Set TAD to answer with OGM 2 |
| announcement. |
|
|
2 | Play all messages. |
|
|
3 | Play new messages. |
|
|
4 | Monitor the room where the TAD |
| is installed. The room is moni- |
| tored for 15 seconds. Press 4 |
| again for another 15 seconds. |
| You can repeat this for as long as |
| you like. |
|
|
51 | Delete all messages (except new |
| messages). |
|
|
6 | Stop playback and message |
| recording. |
|
|
7 | Record a memo. |
|
|
81 | Change OGM 1. |
|
|
18
Press: | To: |
|
|
|
|
82 | Play OGM 1. |
|
|
91 | Change OGM 2. |
|
|
92 | Play OGM 2. |
|
|
#1 | Change remote operation secu- |
| rity code. |
|
|
#2 | Change CBT Code. |
|
|
# | Skip OGM 1 during playback. |
|
|
After you press 2 or 3:
Press: | To: |
|
|
|
|
5 | Delete the current |
| message. |
|
|
1 while message | Replay the previous |
number and day/ | message. |
time is playing |
|
|
|
1 during message | Replay the current |
playback | message. |
|
|
3 | Skip forward to the |
| next message. |
|
|
6 | Stop message play- |
| back. |
|
|