Entering a Pause
In some telephone systems, you must dial an access code (9, for example) and wait for a second dial tone before you can dial an outside number. You can store the access code with the phone number. However, you should also store a pause after the access code to allow the outside line time to connect. To en- ter a
Dialing a Memory Number
To dial a number assigned to a speed dial button, simply press the button (M1– M3) for the number you want to dial. (You do not need to press TALK first.)
To dial a number stored in a standard memory location, press TALK. When you hear a dial tone, press MEM and enter the
Note: If you select an invalid memory lo- cation (for example 3 instead of 03), the phone sounds an error tone. Press MEM again and
Chain-Dialing Service Numbers
For quick recall of numbers for special services (such as alternate long dis- tance or
Dial the service’s main number first. Then, at the appropriate place in the call, press the memory location button
Testing Stored Emergency Numbers
If you store an emergency service’s number (police department, fire depart- ment, ambulance) and you choose to test the stored number, make the test call during the late evening or early morning hours to avoid peak demand periods. Also, remain on the line to ex- plain the reason for your call.
USING A HEADSET
You can talk with
To connect the headset, open the rub- ber cover marked 
on the side of the handset, then insert the headset’s plug into the jack.
Notes:
•Connecting a headset disconnects the handset’s earpiece and micro- phone.
•
or 
on the handset also controls the connected headset’s volume.
13