Press MUTE again to resume your phone conversation.
USING FLASH
FLASH performs the electronic equiva- lent of a switchhook operation for spe- cial services, such as Call Waiting.
For example, if you have Call Waiting, press FLASH to answer an incoming call without disconnecting the current call. Press FLASH again to return to the first call.
Note: If you do not have any special phone services, pressing FLASH might disconnect the current call.
USING TONE SERVICES ON A PULSE LINE
Some special services, such as bank-
1.Be sure
PULSE.
2.Dial the service’s main number.
3.When the service answers, press TONE ( 
). Any additional numbers you dial are sent as tone signals.
4.After you complete the call, return the handset to the base or press TALK. The phone automatically resets to the pulse mode.
PAGING
To page the person who has the hand- set or to locate the handset when the phone is not in use, press PAGE on the base. The handset beeps for about 15 seconds. To stop the beeping sooner, press TALK on the handset twice or PAGE on the base.
PAGE
Notes:
•Make sure you press TALK twice to stop the handset from beeping. If you press TALK only once, you get a dial tone.
•If you receive a call while the page is sounding, the handset stops beep- ing and starts ringing.
11