Radio Shack ET-1104 owner manual Using Mute, Using Flash

43-1104.fm Page 14 Wednesday, August 18, 1999 8:05 AM

USING MUTE

To talk to someone in the room without the person on the other end of the phone line hearing your conversation, press MUTE. The MUTE indicator flash- es.

Press MUTE again to resume your phone conversation.

USING FLASH

FLASH performs the electronic equiva- lent of a switchhook operation for spe- cial services, such as Call Waiting.

For example, if you have Call Waiting, press FLASH to answer an incoming call without disconnecting the current call. Press FLASH again to return to the first call.

Note: If you do not have any special phone services, pressing FLASH might disconnect the current call.

14

USING TONE SERVICES ON A PULSE LINE

Some special services, such as bank- by-phone, require tone signals. If you have pulse service, you can still use these special tone services by following these steps.

1.Be sure DIAL MODE is set to P (pulse).

2.Dial the service’s main number.

3.When the service answers, press TONE ( ). Any additional numbers you dial are sent as tone signals.

M 1 M2 M 3 M4

4.After you complete the call, return the handset to the base or press TALK. The phone automatically re- sets to the pulse mode.