Radio Shack ET-1104 owner manual Wide Groove

Page 9

43-1104.fm Page 9 Wednesday, August 18, 1999 8:05 AM

4.Route the modular cord through the wide groove on the bottom of the bracket.

7.Align the keyhole slots with the mounting screws and slide the base downward to secure it.

Wide

Groove

5.Insert the supplied AC adapter’s barrel plug into the DC IN 9V jack on the back of the base.

6.Route the adapter’s cord through the narrow groove on the bottom of the bracket.

8.Plug the modular cord into a modu- lar phone line jack.

9.Plug the adapter into a standard AC outlet.

Narrow

Groove

10.Press and lift out the handset hold- er, rotate it 180× , then snap it back into place so it holds the handset.

11.Lift the base’s antenna to a vertical position.

9

Image 9
Contents ET-1104 Features Fm Page 3 Wednesday, August 18, 1999 805 AM FCC Statement Read this Before InstallationContents Installation Mounting the PhoneOn a Desk Top On a Wall Plate Directly on the Wall Wide Groove Connecting and Charging the Battery Pack Setting the Dialing Mode Setting the RINGER’S Tone and Volume Using Redial Setting the Handset VolumeOperation Making and Receiving CallsUsing Flash Using MutePaging Memory DialingStoring a Number in Memory Dialing a Memory Number Entering a PauseUsing a Headset Chain-Dialing Service NumbersTesting Stored Emergency Numbers Troubleshooting Fm Page 19 Wednesday, August 18, 1999 805 AM Care and Maintenance Replacing Battery Pack Lightning FCC Wants YOU to KnowFm Page 23 Wednesday, August 18, 1999 805 AM RadioShack Division of Tandy Corporation Fort Worth, Texas