4.To assign the number to a speed di- al button, press MEM, then press a speed dial button
M 1 | M 2 | M 3 | M 4 |
To delete a stored number, lift the hand- set and press MEM twice, then enter the memory location number
To store the number in a standard memory location, press MEM, then enter the
The handset sounds a long beep to indicate that the number is stored.
5.For each stored number, write the person’s or company’s name next to the appropriate location number on the supplied memory directory stick- er. (Use a pencil in case you need to change the number later.) Peel the backing off the sticker and attach it to the phone.
Entering a Pause
In some telephone systems, you must dial an access code (9, for example) and wait for a second dial tone before you can dial an outside number. You can store the access code with the phone number. However, you should also store a pause after the access code to allow the outside line time to connect. To en- ter a
Dialing a Memory Number
To dial a number assigned to a speed dial button, simply press the button (M1– M4) for the number you want to dial. (You do not need to press TALK first.)
To replace a stored number, simply store a new one in its place.
16