Radio Shack ET-1101 Using Redial, Using Mute, Using Flash, Using Tone Services on a Pulse Line

43-1101.fm Page 12 Friday, July 9, 1999 9:32 AM

USING REDIAL

To quickly redial the last number dialed, press TALK then REDIAL.

Notes:

•The redial memory holds up to 32 digits, so you can redial long-distance as well as local numbers.

•The redial memory can also store tone entries (see “Using Tone Ser- vices On a Pulse Line”) and pause entries (see “Entering a Pause in a Memory Number” on Page 15).

USING MUTE

To talk to someone else in the room with- out the person on the other end of the phone line hearing your conversation, press MUTE.

USING FLASH

FLASH provides the electronic equivalent of a switchhook signal for special phone services such as Call Waiting.

TONE

FLASH

For example, if you have Call Waiting, press FLASH to answer an incoming call without disconnecting the current call. Press FLASH again to return to the first call.

Note: If you do not have any special phone services, pressing FLASH might disconnect your current call.

MUTE

Press MUTE again to resume your phone conversation.

12

USING TONE SERVICES ON A PULSE LINE

Some special services, such as bank-by- phone, require tone signals. If you have pulse service, you can still use these tone services by following these steps.

1. Dial the service’s main number.