Radio Shack ET-1101 owner manual Memory Dialing, Storing a Number in Memory

43-1101.fm Page 14 Friday, July 9, 1999 9:32 AM

MEMORY DIALING

You can store up to 10 numbers of up to 16 digits each in the ET-1101’s memory.

Notes:

•To keep your accounts secure, we recommend you do not store your personal access code for services such as bank-by-phone in a memory location.

•When storing numbers for special services (such as alternate long dis- tance or bank-by-phone), store the service’s main phone number in one memory location and numbers for ad- ditional information in other locations.

Storing a Number in Memory

Note: If you do not press any button on the keypad within about 10 seconds, 3 beeps sound and the phone exits the memory storing process. Start again from Step 1.

MEMORY

14

1.While the phone is not in use, press

MEMORY.

2.Dial the number you want to store.

3.Press MEMORY again.

4.Press the memory location number (0–9) you want to use. The keypad sounds one long tone to confirm that the phone number has been stored.

Note: If you do not hear a long tone, you did not successfully store the number. Start again at Step 1.

5.Pull out the memory index card at the bottom of the base and write the associated name or stored number next to the location number. We rec- ommend you use a pencil so you can change it later.