Notes:
•When you first use the phone after charging or recharging the battery pack, the phone might not work and you might hear error tones (three beeps).
If you hear the error tones, return the keypad to the base for about 5 sec- onds to reset the security access- protection code.
•About once a month, fully discharge the battery pack by keeping the phone off the base until the LOW BATT indicator flashes. Otherwise, the battery pack loses its ability to fully recharge.
•If the battery pack becomes com- pletely discharged or the base loses power while the handset is away from it, the security
•If you are not going to use your phone for an extended period of time, dis- connect its battery pack. This helps increase the battery pack’s usable life.
ATTACHING THE HEADSET
•If the CHARGE/IN USE indicator does not light when you place the keypad on the base, be sure the battery pack and AC adapter are cor- rectly and securely connected. Also, check the charging contacts on the keypad and base. If the contacts are dirty or tarnished, clean them with a pencil eraser.
Charging Contacts
Charging Contacts
HOLDER
Insert the tabs on the headset holder into the slots on the base and snap it into place.
8