Memory Dialing
;Z_jýC[cehoýdd — Edit the record as described in Steps
:[b[j[ýC[cehoýdd — The display prompts you to confirm
the deletion. Move the cursor to O[i or De, then press SELECT/VOLUME. The phone beeps, and C[cehoýddý :[b[j[Z appears.
=eý8WYa — Returns you to the list of memory numbers.
When you finish editing or deleting memory numbers, press MEM or return the handset to the base to exit the Memory Store display.
+P"VJG"$CUG
1.Press MEM. The CHARGE indicator blinks.
2.Enter the number (up to 20 digits) and any tone mode changes or pause entries (see “Tone Services On a Pulse Line” on Page 17 or “Entering a Pause”).
3.Press MEM again, then enter the memory location number (0 – 9) where you want to store the number. A tone sounds to indicate that the number is stored.
To clear a stored number, simply store a new number in its place. Or, press MEM twice. Then press the memory location number (0 – 9) you want to clear. A tone sounds.
Use the supplied memory directory sticker to record your stored numbers.
Peel the backing from the sticker and attach it to the base.
'06'4+0)"#" 2#75'
In some telephone systems, you must dial an access code (9, for example) and wait for a second dial tone before you can dial an outside number. You can store the access code with the phone number. However, you should also store a pause after the access code to allow the outside line time to connect.
To enter a
20