Radio Shack 43-683 owner manual 566+06*&+#.+0/1, Mode

3.Plug the battery pack’s connector into the socket in the compartment, (the connector fits only one way), replace the battery pack, and replace the cover.

To charge the battery pack, place the handset either face- up or face-down on the base.

The CHARGE indicator on the base lights and the number of new and total Caller ID records for each line appears on the handset's display. Be sure the battery pack is properly connected before you try to charge it. The CHARGE indicator lights when the handset is on the base even if the battery pack is not properly connected.

Recharge the battery pack when Bemý8Wjj[ho flashes.

When you first use the phone after charging or recharging the battery pack, the phone might not work and you might hear a beep when you press LINE 1 or LINE 2. Return the handset to the base for about five seconds to reset the security access-protection code.

The supplied battery pack should last about a year. If the battery pack does not hold a charge for more than 2 hours after an overnight charge, replace it with a new 3.6-volt, 600 mAh battery pack with a connector that fits the socket in the battery compartment.

You can order a replacement battery pack through RadioShack. Install the new battery pack and charge it for about 15–20 hours.R

If you have trouble replacing the battery pack, take the phone to RadioShack for assistance.#

5'66+0)"6*'"&+#.+0)"/1&'

Your phone comes set for tone dialing. If you have pulse service, you must change the dialing mode. If you are not sure which type of service you have, do this test.

1.Press LINE 1 or LINE 2 and listen for a dial tone.

2.Press any number other than 0.±

If the dial tone stops, you have touch-tone service. If the dial tone continues, you have pulse service.

To set the dialing mode, press the line button to hang up the phone if necessary. Hold down FLASH on the base keypad until the phone beeps, then press # for pulse dialing or * for tone dialing. The phone beeps.

R"9#40+0)ýRýR"

Dispose of the old battery pack promptly and properly. Do not burn or bury it (see “Battery Safety Instructions+” on Page 5).

#"+/2146#06"#

The EPA certified RBRC® Battery Recycling Seal on the nickel-cadmium (Ni-Cd) battery indicates RadioShack is voluntarily participating in an industry program to collect and recycle these batteries at the end of their useful life, when taken out of service in the United States or Canada. The RBRC program provides a convenient alternative to placing used Ni-Cd batteries into the trash or the municipal waste stream, which may be illegal in your area. Please call 1-800-THE-SHACK (1- 800-843-7422) for information on Ni-Cd battery recycling and disposal bans/restrictions in your area. RadioShack’s involvement in this program is part of the company’s commitment to preserving our environment and conserving our natural resources.

±"016'"±"	Mode
• If your phone system requires
	Dialing
that you dial an access code (9,
for example) before you dial an
outside number, do not press	the
the access code either.
	Setting
• The phone exits setting mode if
a call is received, or if you press
either line button.

9