MEMORY OPERATION
You can store up to 30 numbers in the handset’s memory and another 10 in the base’s memory, then dial a stored num- ber by pressing a
You cannot dial a number stored in one memory location (the base or the hand- set) using the keypad on the other.
STORING A NUMBER IN MEMORY
Note: An error tone sounds and the phone exits the storing process if you wait more than 20 seconds between key presses.
In the Handset
Each number you store can be up to 20 digits long, and each name can be up to
13characters.
1.Lift the handset.
2.Hold down MEMORY until the hand- set beeps and Memory Store and a list of memory location num- bers (and names, if any) appears.
MEMORY
SELECT
3.Select an empty memory location (or the one you want to replace) by using 
or 
to scroll through the list or entering the location number
Note: If the phone sounds five quick beeps, you have made an entry error and the number was not stored.
4.Press SELECT. Store Name appears. If you do not want to enter a name, skip to Step 6. <Memory nn> appears as the name (nn is the memory location number you selected).
5.To enter a name, use 
or 
to select the characters and 
or 
to move the cursor.
Repeatedly press 
to view the characters in alphabetical order. The display shows uppercase let- ters first, then lowercase letters, numbers, and special characters.
Press 
to view the characters in reverse order. You can hold down 
or 
to scroll rapidly through the characters.
24