43-1083.fm Page 10 Tuesday, August 17, 1999 2:17 PM
6.Press the AC cord into the top and bottom grooves on the left side of the bracket, press the modular cord into the top and bottom grooves on the right side of the bracket, then plug the modular cord into a modular phone jack.
7.Line up the keyhole slots on the bracket with the screws on the wall, then slide the base down onto the screws until it is secure.
8.Press up on the handset holder to remove it, turn it over so its tabbed edge faces up, then press it back down into its slot on the base.
CORDLESS • SPEAKERPHONE
POWER
10
9.Plug the
10.For the best reception, adjust the base’s antenna so it stands straight up.
Note: If you want to remove the sup- plied bracket after attaching it, simply press in the tab on each side of the bracket and lift the bracket away from the base.