Radio Shack ET-908 owner manual Turning On/Off the Ringer

43-1083.fm Page 14 Tuesday, August 17, 1999 2:17 PM

Turning On/Off the Ringer

The ET-908’s handset is preset to ring when a call comes in. To turn off the ringer, follow these steps.

1.Press PROG. The indicator above TALK flashes.

2.Press #, then 5.

Note: If the indicator above TALK turns off before you complete this step, press PROG again then repeat this step.

3.Press # again. The ringer is now turned off.

To turn the handset’s ringer on again, simply follow the steps in “Checking/ Setting the Ringer Type” on Page 13 and select the desired ringer type.

Notes:

•If you turn off the ringer, you can still make calls normally and you can still answer calls if you hear another phone on that same line ring (see “Operation” on Page 15).

•If the handset’s ringer is turned on and you press OFF while the handset is ringing, the handset’s ringer turns off for that call only, then it automatically turns on about 5 seconds after the call ends. See “Making/Answering Calls” on Page 15.

14