Radio Shack ET-908 owner manual Mounting Directly on the Wall

43-1083.fm Page 9 Tuesday, August 17, 1999 2:17 PM

Mounting Directly on the Wall

Using a drill (not supplied) and the sup- plied screws and spacers, you can easily mount your ET-908 directly on the wall.

1.At the desired mounting location, drill two holes 315/16 inches apart, one above the other.

315/16”

2.Place a spacer over each screw, then thread a screw into each wall hole until the screw’s head extends about 1/4 inch from the wall.

3.Press the ET-908’s AC cord under the recessed clip directly below it on the bottom of the phone.

4.Plug one end of the supplied 7- foot modular cord into the TO TEL LINE jack, then press the cord under the other recessed clip on the bottom of the phone.

TO TEL. LINE

5.Insert the tabs on the supplied mounting bracket into the slots on the bottom of the base, then press the bracket down until it snaps into place.

9