43-1083.fm Page 8 Tuesday, August 17, 1999 2:17 PM
4.Press the AC cord into the top and bottom grooves on the left side of the bracket, press the modular cord into the center groove on the right side of the bracket, then plug the modular cord into the modular phone jack.
5.Line up the keyhole slots on the bracket with the studs on the wall plate, then slide the base down onto the wall plate until it is secure.
6.Press up on the handset holder to remove it, turn it over so its tabbed edge faces up, then press it back down into its slot on the base.
CORDLESS • SPEAKERPHONE
POWER
7.Plug the
8.For the best reception, adjust the base’s antenna so it stands straight up.
Note: If you want to remove the sup- plied bracket after attaching it, simply press in the tab on each side of the bracket and lift the bracket away from the base.
8