Radio Shack 2.4 GHz 2-Line Digital Spread Spectrum Cordless Phone with Call Waiting/Caller ID

Page 15

3.A menu appears with 7kje JWba selected. Press CONF/9 to select 9?:9M, then press SELECT/CH to change the setting. Ed or E\\ appears indicating the selected setting.

4.Press CID/HOLD and return the handset to the base to store the new setting.

STORING YOUR AREA CODE

You can store your local area code in the phone’s Caller ID record so it does not show the area code if the received call is from your local area. If for some reason you need to dial the area code (or store it in memory), you can add it afterwards. See “Adding/De- leting the Area Code” on Page 25.

Note: If your calling area requires 10-digit di- aling including area code, do not enter the area code but leave this option blank.

Follow these steps to store your area code.

1.Lift the handset and hold down CID/ HOLD until 9Wbb[h ?: I[jkf appears on the display with B_d[ ' selected.

2.Use ∗/TONE/6 or #/7 to select B_d[ ' or B_d[ (. Then press CONF/9.

3.A menu appears with 7kje JWba selected. Press CONF/9 twice to select 7h[W 9eZ[, then press SELECT/CH.

4.Enter your three-digit area code. If you make a mistake, repeatedly press ∗/ TONE/6 or #/7 to move the cursor over the incorrect digit, then enter the correct number.

Note: If an area code is already stored, it appears on the display. To delete the area code, press DEL/VOL three times,

then enter your area code. Or you can use ∗/TONE/6 or #/7 to move the cur- sor and edit the area code.

5.Press SELECT/CH to store the area code, then press CID/HOLD and return the handset to the base to store your new entry.

Installation

15

Page 14 Page 16
Image 15
Page 14 Page 16
Contents GHz 2-Line Digital Spread Spectrum Cordless Phone Important Information FCC Statement Read this Before InstallationImportant Safety Instructions FCC Wants YOU to KnowLightning Important Information Save These Instructions Battery Safety InstructionsContents Caller ID Operation Handset Only TroubleshootingFacedown or Faceup Handset Charging FeaturesImportant Caller ID Information Installation Connecting to the Phone LinesMounting the Phone On a Wall Plate or Wall On a Desk TopCONNECTING, CHARGING, and Replacing the Battery Pack Setting the Dialing Mode On the Handset Adjusting the RingerSetting Auto Talk Setting Caller ID/CALL WaitingStoring Your Area Code Using the Handset Using SpeakerphoneBasic Operation Putting a Call on Hold Switching Between the Handset and SpeakerphoneAdjusting Speakerphone Volume Using MuteUsing Both the Handset and Speakerphone Making a Conference CallWay Conferencing Using Tone Services on a Pulse Line Using the Phone with Extension PhonesUsing Redial Using FlashUsing a Headset ∗ # & space Memory DialingStoring a Number in Memory HandsetEditing or Deleting a Number in the Handset’s Memory BaseEntering a Pause Dialing a Memory Number CHAIN-DIALING Service NumbersTesting Stored Emergency Numbers Reviewing Memory Numbers Handset onlyFhlWj DWc Caller ID Operation Handset OnlyReviewing Caller ID Records Caller ID MessagesDeleting Caller ID Records ADDING/DELETING the Area CodeDialing Numbers from a Caller ID Record Storing a Caller ID Record to MemoryProblem Suggestion TroubleshootingCare Limited One-Year Warranty
Top Page Image Contents