Memory Dialing
Ô NOTES Ô
Memory Dialing from Standby Mode
•If you press SELECT or MEM before TALK/ FLASH, you can confirm the name and the number stored in the selected memory location.
•To exit the memory function without dialing, press END. The handset returns to the standby mode.
•Whenever you are using a memory menu screen, you must press a key within 30 seconds or the phone will return to the standby mode.
Memory Dialing from Talk Mode
If you select a memory location that does not have a stored number, the phone will not dial.
MAKING CALLS WITH
MEMORY DIALING
Memory Dialing from Standby Mode
1.Press MEM . The handset displays your programmed memory locations.
2.Press 
VOL/RING or 
VOL/RING keys, or enter the number (1 - 0) to select the memory location you would like to dial. Ô
3.Press TALK/FLASH. ¨Talk¨ and the volume setting appear on the display. Then the displayed number is dialed. Ô
Memory Dialing from Talk Mode
1.Press TALK/FLASH. ¨Talk¨ and the volume setting appear.
2.Press MEM .
3.Press 
VOL/RING or 
VOL/RING keys or enter a number (1 - 0) to select the memory location of the desired phone number. The selected name is displayed. Ô
4.The phone number in the memory will be dialed when SELECT is pressed.
5.To hang up, press END.
CHAIN DIALING
The memory locations on the handset are not limited to phone numbers. You can also store a group of numbers (up to 20 digits) that you need to enter once your call connects. This is referred to as Chain Dialing.
22