Radio Shack TAD-732 owner manual Connecting and Charging the Handset Battery Pack

Page 12

43-732.fm Page 12 Friday, August 13, 1999 1:42 PM

7.Align the keyhole slots with the mounting screws and slide the base downward to secure it.

8.Plug the adapter into a standard AC outlet. The TAD-732 beeps and 00 appears .

9.Plug the end of the modular cord into a modular phone line jack.

10.Raise the base’s antenna to a verti- cal position.

12

CONNECTING AND CHARGING THE HANDSET BATTERY PACK

The TAD-732 comes with a recharge- able nickel-cadmium battery pack in the handset but not connected. Before using your phone, you must connect the bat- tery pack and then charge it for about 15 hours.

1.Press down and slide off the battery compartment cover.

2.Lift the battery pack out of the com- partment, and plug its connector into the socket inside the compartment. The connector fits only one way.

3.Put the battery pack in the compart- ment and replace the cover.

4.To charge the battery pack, simply place the handset on the base. The CHARGE indicator on the base lights.

Image 12

Contents TAD-732 Features TAD FeaturesTelephone Features Read this Before Installation FCC StatementContents Replacing the Battery Pack FCC Wants You to Know Installing the HANDSET’S Antenna PreparationSelecting a Location Installing the Phone Placing the Base on a Desk TopMounting the Base on a Wall Plate Mounting the Base Directly on the Wall 315/16 Connecting and Charging the Handset Battery Pack Fm Page 13 Friday, August 13, 1999 142 PM Setting the Dialing Mode Setting the Number of Rings Setting the DAY and TimeTurning the Ringers OFF or on With the Handset With the BaseSetting the HANDSET’S Volume Telephone OperationMaking and Receiving a Call Changing ChannelUsing Redial Using FlashUsing Mute Using Memory DialingChain-Dialing Service Numbers Storing a Number in Memory Entering a PauseDialing a Stored Number Using AN Optional Headset Testing Stored Emergency NumbersRemoving the Belt Clip Fm Page 22 Friday, August 13, 1999 142 PM Setting the TAD to Answer Calls Using the MailboxesTAD Operation Using the Handset Deleting an Outgoing MessageUsing the ANNOUNCE- only Feature Adjusting the TAD’S VolumeScreening Calls Recording Incoming Messages Recording a MemoPlaying Messages Deleting Messages Changing the Remote Operation Security CodeUsing TOLL-SAVER Using Remote ANSWER-ONUsing Remote Commands Remote OperationRemote Commands Press Record a memo to MailboxTroubleshooting Problem SuggestionCare and Maintenance Replacing Battery Pack FCC Wants YOU to Know LightningFm Page 35 Friday, August 13, 1999 142 PM RadioShack Division of Tandy Corporation Fort Worth, Texas