7.Plug the adapter into a standard AC outlet. The
8.Raise the base’s antenna to a verti- cal position.
2.Plug one end of the supplied short modular cord into the telephone jack on the back of the base.
3.Insert the supplied AC adapter’s barrel plug into the DC 9V jack on the back of the base.
Mounting the Base on a Wall Plate
1.Remove the mounting bracket by holding in both tabs and gently pull- ing out the wide end of the bracket.
4.Route the modular cord through the left groove on the bottom of the base and the adapter cord through the groove below the strain relief slot.
Strain
Relief
Slot
9