Radio Shack TAD-732 owner manual Using, Memory Dialing

43-732.fm Page 19 Friday, August 13, 1999 1:42 PM

USING TONE SERVICES ON A PULSE LINE

Some special services, such as bank-by- phone, require tone signals. If you have pulse service, you can still use these special tone services by following these steps.

1.Be sure T/P is set to P.

2.Lift the handset and press TALK.

3.Dial the service’s main number.

4.When the service answers, press . Any additional numbers you dial are sent as tone signals.

5.After you complete the call, return the handset to the base or press TALK on the handset. The phone automatically resets to pulse dialing.

USING PAGE

To page the person with the handset or to find the handset, press PAGE on the base. The handset beeps three times. If you want the handset to beep for a long- er time, you can hold down PAGE for 2 seconds to have the handset beep for about 35 seconds.

To stop the handset from beeping be- fore it automatically stops, press TALK twice or press PAGE.

Note: Paging does not work during a call.

MEMORY DIALING

You can store up to 9 phone numbers in memory, then dial a stored number by pressing a one-digit memory location number.

Each stored number can be up to 16 digits long, including tone and pause en- tries.

19