Radio Shack TAD-764 owner manual Telephone, Setting the Handset Volume, Using Reset, Using Redial

43-764.fm Page 14 Friday, August 13, 1999 2:43 PM

TELEPHONE

SETTING THE HANDSET VOLUME

The handset’s volume control lets you adjust the sound you hear through the handset.

USING RESET

To disconnect a call without hanging up the phone, hold down RESET for about 1 second. When you release it and hear a dial tone, dial again.

Illus. showing the handset volume con-

To increase or decrease the volume, roll the handset’s volume control up or down.

Illus. showing RESET button.

USING REDIAL

You can quickly dial the last number di- aled. When you hear a dial tone, press

REDIAL.

Illus. showing the

REDIAL button.

Note: The redial memory holds up to 31 tone digits or 32 pulse digits, and lets you redial long distance or local num- bers.

USING TONE SERVICES ON A PULSE LINE

Some special services, such as bank- by-phone, require tone signals. If you have pulse service, you can still use these special tone services by following these steps.

1.With TONE/PULSE set to PULSE, dial the service’s main number.

2.When the service answers, set

TONE/PULSE to TONE. Any addi- tional numbers you dial are sent as tone signals.

3.After you complete the call, set

TONE/PULSE back to PULSE and hang up the phone.

14