4.Insert the supplied AC adapter’s barrel plug into the AC 9V 440mA jack on the back of the base.
Illus. of AC 9V 440mA jack. Show- ing barrel plug about to be inserted into jack and modular cord already connected.
5.Plug the other end of the short modular cord into the wall plate jack. Then move the power cord to the right of the two tabs, align the wall plate studs with the TAD’s key- hole slots and slide the TAD down- ward to secure it.
Illus. of wall plate alignment and power cord attachment.
6.Slide the handset clip up and out of its retaining slot, rotate it 180°, then slide the clip back into its slot.
Illus. showing clip being re- moved and re-inserted.
7.Plug the other end of the coiled cord into the handset’s jack.
Illus. showing coiled cord connection to handset.
8.Place the handset into the cradle.
9.Plug the adapter into a standard AC outlet.
9