Radio Shack TAD-764 Illus. of Answer PLAY/SKIP indicators, Illus. showing routing of modular cord

Page 8

43-764.fm Page 8 Friday, August 13, 1999 2:43 PM

6.Route the adapter’s cord through the strain relief slot on the base.

Illus. showing cord rout- ed through the strain re- lief slot.

7.Plug the adapter into a standard AC outlet.

When you first connect power, the PLAY/SKIP indicator flashes (until you record the outgoing message), the ANSWER indicator flashes (if you did not install a backup bat- tery), and the TAD automatically runs a self-test for about 20 sec- onds. You cannot operate the TAD during this test. When the test is complete, the TAD Beeps once and announces, “Answer off.”

Illus. of ANSWER and

PLAY/SKIP indicators.

8

On a Wall Plate

1.Plug one end of the supplied short modular cord into the TO LINE jack on the back of the base.

Illus of TO LINE jack and end of modular cord about to be inserted into jack.

Other connections are not yet made.

2.Route the cord into the groove on the phone’s base.

Illus. showing routing of modular cord.

3.Plug one end of the supplied coiled cord into the jack on the bottom of the base and route the cord into the groove beside the jack.

Illus. showing routing of coiled cord before it is plugged into the handset.

Image 8
Contents TAD-764 Features Answering System FeaturesTelephone Features Read this Before Installation FCC StatementContents Installation Installing a Backup BatteryIllus. showing battery installation Illus. showing removal of battery compartment coverMounting the TAD On a Desk TopIllus. of Answer PLAY/SKIP indicators Illus. showing routing of modular cordIllus. showing coiled cord connection to handset Illus. of wall plate alignment and power cord attachmentIllus. showing clip being re- moved and re-inserted On a Wall Illus. showing screw positions onIllus. showing clip being removed and re-insert Setting the Dialing Mode Setting the DAY and TimeIllus. showing Clock switch PreparationSetting the RINGER’S Volume Illus. showing Ringer switchSetting the Handset Volume Using ResetUsing Redial Using Tone Services on a Pulse LineUsing the Phone Number Index Card Illus. showing the phone number index card and its coverSetting the Number of Rings Illus. showing 4/7/TS switchAnswering System Operation Toll SaverSetting the TAD to Answer Calls Recording Incoming MessagesScreening Calls Playing MessagesDeleting Messages Recording a MemoIllus. showing Code switch Changing the Remote Operation Security CodeRemote Operation Remote Commands PressTroubleshooting Problem SuggestionCare and Maintenance FCC Wants YOU to Know LightningFm Page 25 Friday, August 13, 1999 243 PM Fm Page 26 Friday, August 13, 1999 243 PM Fm Page 27 Friday, August 13, 1999 243 PM RadioShack Division of Tandy Corporation Fort Worth, Texas