ClearSounds 40XLC Installation Steps, Installing the Optional Batteries, Setting the Dialing Mode

Page 11

Installation Steps

Installation of your ClearSounds™ 40XLC Ampliﬁed Phone is easy. There are some basic steps you need to take when you set-up your 40XLC Phone for the ﬁrst time.

1.Check parts list. (See page #5 for complete list)

2.Install (4) AAA Alkaline batteries (not included). This provides power to the Caller ID Screen.

3.Set the dialing mode.

4.Choose desktop or wall mount.

5.Set ringer and auxiliary alert.

6.Program your memory dial buttons.

INSTALLING THE OPTIONAL BATTERIES

The batteries are necessary in case of network power failure to save stored numbers in memory and are required for the “Phone Book” use.

1.Open the battery compartment door located on the bottom of your phone by un- screwing the battery compartment door and removing it from the bottom of your phone (screwdriver provided).

2.Insert correctly 4 AAA alkaline batteries (purchased separately) in the battery com- partment (See ﬁgure #6). Be sure to observe battery polarity as imprinted on the base of the compartment.

3.Replace the battery compartment door and screw back in place.

4.The batteries will last approximately 1 year before needing replacement.

Figure #6 – Installing the batteries

NOTE: Always unplug the line cord before installing new batteries.

SETTING THE DIALING MODE

Set the dial mode switch on the bottom of the phone to “T” if you have Touch Tone service, or “P” for Pulse dialing if you have rotary dialing service. Default is set to the “T” dialing switch mode (See ﬁgure #7).

Figure #7 – Dialing mode switch

11

Image 11

Contents 40XLC Congratulations on your purchase Table Of Contents Speciﬁcations 40XLC Miscellaneous Feature SettingTroubleshooting Guide Warranty and ServiceComponents Please Save These Instructions Flash button Redial button Features & FunctionsFigure #3 Figure #4 Figure #5 Care of PhoneSetting the Dialing Mode Installation StepsInstalling the Optional Batteries Ring Style Strobe & Optional Bed Shaker Ring SignalingRinger Volume Programming the Ringer & Auxiliary AlertProgramming Memory Dial Buttons Figure #10 Strobe Ringer Flashing incoming call indicatorFigure #13 Wall Mount Use Phone Mounting InstallationsDesk / Table Use Figure #18 Reversing The Hook Making and Receiving a Call Using the Speakerphone40XLC Phone Operation Using Audio and Telephone Headset Accessory Jacks Voice Ampliﬁcation and Tone Using the Ampliﬁcation FunctionReceiving/Answering a Call Figure #24 Amplify Button Using the Outgoing Speech Volume Using the volume reset overrideUsing your 40XLC Ampliﬁed Phone with hearing aids 40XLC Caller ID Operation Using The Last Number RedialUsing The Flash Button Using The Mute ButtonViewing Incoming Calls Battery Low IndicatorReview Call History Turn OFF the New Calls / Message Waiting Indicator LightRemove All Call Records Remove Call Record From The Caller ID ListCall Waiting Remove a Speciﬁc Call RecordDisplay Screen Messages 40XLC Miscellaneous Feature Settings Set The LanguageTurn on The Call Waiting Caller ID Feature Set Area Code / LDS Long Distance Service Code Hour format LCD / Screen Contrast AdjustmentChoosing The Date / Hour Format Date formatTo Add a New Number/Name Setting Up Your Phone BookDIM To Save Numbers From Caller ID To The Phone Book To Review / Modify a Number/Name In Your Phone BookTo Delete a Number From Your Phone Book To Dial a Number From The Phone Book Recall / Delete One Of the Last 30 Numbers DialedAuto on Hook No dial tone Troubleshooting GuideMaximum Outgoing Gain DimensionsSpeciﬁcations Maximum GainFCC Registration Notice Power RequirementsThis equipment is hearing aid compatible