ClearSounds 40XLC user manual Remove Call Record From The Caller ID List, Call Waiting

Page 25

NOTE: The red flashing light will return with your next missed call, next call with Caller ID information or if you receive a message through Message Waiting Service.

Figure #35 - New Call/ Message Waiting Indicator

Remove Call Record From The Caller ID List

Remove A Specific Call Record

In the hook position,

1. Using the or arrow buttons to move into the list and select the required number to delete.

2.Press the C button.

3.The screen displays <<DEL?>>.

4.Press the C button to confirm.

5.Press the OK button to exit.

Remove All Call Records

In the hook position,

3. Using the or arrow buttons to move into the list and select the required number to delete.

4.Press & hold the C button until the screen displays <<ALL DEL?>>.

5.Press the C button to confirm.

6.Press the OK button to exit.

NOTE: Once a call is removed from call history, it cannot be retrieved.

Call Waiting

Your 40XLC Phone also has a Caller ID with Call Waiting feature that works with your service from the local phone service provider. Caller ID with Call Waiting lets you see who’s calling before you answer the phone even when you’re on another call. If you are on a call and a 2nd call comes in, you will hear the audible beep in the handset and the LCD will show Caller 2 and their information. If you choose to answer the call, press the FLASH button or the Phone Hook button to transfer to the 2nd caller. If you choose not to answer the 2nd call, the caller’s information will be stored in the Caller ID history and can be viewed later.

25

Image 25
Contents 40XLC Congratulations on your purchase Table Of Contents Troubleshooting Guide 40XLC Miscellaneous Feature SettingWarranty and Service SpecificationsComponents Please Save These Instructions Flash button Redial button Features & FunctionsFigure #3 Figure #4 Figure #5 Care of PhoneInstalling the Optional Batteries Installation StepsSetting the Dialing Mode Ringer Volume Strobe & Optional Bed Shaker Ring SignalingProgramming the Ringer & Auxiliary Alert Ring StyleProgramming Memory Dial Buttons Figure #10 Strobe Ringer Flashing incoming call indicatorFigure #13 Desk / Table Use Phone Mounting InstallationsWall Mount Use Figure #18 Reversing The Hook 40XLC Phone Operation Using the SpeakerphoneMaking and Receiving a Call Using Audio and Telephone Headset Accessory Jacks Receiving/Answering a Call Using the Amplification FunctionVoice Amplification and Tone Figure #24 Amplify Button Using your 40XLC Amplified Phone with hearing aids Using the volume reset overrideUsing the Outgoing Speech Volume Using The Flash Button Using The Last Number RedialUsing The Mute Button 40XLC Caller ID OperationViewing Incoming Calls Battery Low IndicatorReview Call History Turn OFF the New Calls / Message Waiting Indicator LightCall Waiting Remove Call Record From The Caller ID ListRemove a Specific Call Record Remove All Call RecordsTurn on The Call Waiting Caller ID Feature 40XLC Miscellaneous Feature Settings Set The LanguageDisplay Screen Messages Set Area Code / LDS Long Distance Service Code Choosing The Date / Hour Format LCD / Screen Contrast AdjustmentDate format Hour formatDIM Setting Up Your Phone BookTo Add a New Number/Name To Delete a Number From Your Phone Book To Review / Modify a Number/Name In Your Phone BookTo Save Numbers From Caller ID To The Phone Book Auto on Hook Recall / Delete One Of the Last 30 Numbers DialedTo Dial a Number From The Phone Book No dial tone Troubleshooting GuideSpecifications DimensionsMaximum Gain Maximum Outgoing GainFCC Registration Notice Power RequirementsThis equipment is hearing aid compatible