ClearSounds 40XLC user manual Specifications, Maximum Gain, Maximum Outgoing Gain, Dimensions

Page 33

Difficulty storing numbers in memory

1.Make sure you are pressing the correct sequence of buttons for storing numbers.

2.If you are interrupted by the telephone company’s recorded announcement telling you to hang up or by a loud buzzing noise, ignore and continue to store the num- bers. Or hang up and store the number without lifting the handset or temporarily disconnect the telephone line until you have programmed in all the numbers.

No numbers dialed when memory button is pressed

1.No number stored in that memory button.

2.Make sure phone number was programmed and saved in the memory (See pages 13-14).

3.Make sure programming is done in the correct dial mode (touch-tone or pulse dial- ing).

4.If your phone has been disconnected for a few hours the numbers stored will be lost.

Caller ID information does not show

1.Make sure you are subscribed to Caller ID through your local phone company.

2.Check batteries.

No Caller ID information while on a call

1.Make sure your service provides Caller ID Information while you are on a call. This is sometimes known as “Caller ID on Call Waiting” or “Type II Caller ID”.

2.Make sure you have the Caller ID – Caller Waiting feature on this phone set to ON

(See page 26).

3.The phone cannot display the information if another phone on the same line is in use. Make sure all extensions are on hook.

Cannot dial out of Caller ID

1.Make sure you are subscribed to Caller ID through your local phone company.

2.Make sure your area code is set up properly (See pages 27).

Specifications

Maximum Gain:

42 dB in Wide band (300 to 3400Hz)

52 dB max Low Frequency (Bass 300 Hz)

52 dB max High Frequency (Treble 3400Hz)

Maximum Outgoing Gain:

+12 dB

Dimensions:

Size: 10.5” (with Caller ID screen flat) X 8” X 2”

Weight: 4.33 lbs

33

Page 32 Page 34
Image 33
Page 32 Page 34
Contents 40XLC Congratulations on your purchase Table Of Contents Troubleshooting Guide 40XLC Miscellaneous Feature SettingWarranty and Service SpecificationsComponents Please Save These Instructions Flash button Redial button Features & FunctionsFigure #3 Figure #4 Figure #5 Care of PhoneInstallation Steps Installing the Optional BatteriesSetting the Dialing Mode Ringer Volume Strobe & Optional Bed Shaker Ring SignalingProgramming the Ringer & Auxiliary Alert Ring StyleProgramming Memory Dial Buttons Figure #10 Strobe Ringer Flashing incoming call indicatorFigure #13 Phone Mounting Installations Desk / Table UseWall Mount Use Figure #18 Reversing The Hook Using the Speakerphone 40XLC Phone OperationMaking and Receiving a Call Using Audio and Telephone Headset Accessory Jacks Using the Amplification Function Receiving/Answering a CallVoice Amplification and Tone Figure #24 Amplify Button Using the volume reset override Using your 40XLC Amplified Phone with hearing aidsUsing the Outgoing Speech Volume Using The Flash Button Using The Last Number RedialUsing The Mute Button 40XLC Caller ID OperationViewing Incoming Calls Battery Low IndicatorReview Call History Turn OFF the New Calls / Message Waiting Indicator LightCall Waiting Remove Call Record From The Caller ID ListRemove a Specific Call Record Remove All Call Records40XLC Miscellaneous Feature Settings Set The Language Turn on The Call Waiting Caller ID FeatureDisplay Screen Messages Set Area Code / LDS Long Distance Service Code Choosing The Date / Hour Format LCD / Screen Contrast AdjustmentDate format Hour formatSetting Up Your Phone Book DIMTo Add a New Number/Name To Review / Modify a Number/Name In Your Phone Book To Delete a Number From Your Phone BookTo Save Numbers From Caller ID To The Phone Book Recall / Delete One Of the Last 30 Numbers Dialed Auto on HookTo Dial a Number From The Phone Book No dial tone Troubleshooting GuideSpecifications DimensionsMaximum Gain Maximum Outgoing GainFCC Registration Notice Power RequirementsThis equipment is hearing aid compatible
Top Page Image Contents