Enter prefix number (e.g. access code of the subscriber you call most frequently).
Press “INT/OK” key to confirm.
Activating/Deactivating Automatic Call Answering
The automatic call answering function enables the incoming call to be taken immediately when the handset is removed from the base station.
Press 
key as often as necessary until the HANDSET menu appears and press “INT/OK” key.
Press | or | key to select the submenu and press |
“INT/OK” key. |
| |
Use 
or 
key to switch automatic call answering on or off and press “INT/OK” key to confirm the input.
Press “INT/OK” key to confirm.
Activating/Deactivating Call Timer
It is possible to display the call duration of a call on the handset. The timer starts when the conversation begins.
Press 
key as often as necessary until the HANDSET menu appears and press “INT/OK” key.
Press | or | key to select the submenu and press |
“INT/OK” key. |
| |
Use 
or 
key to switch the call timer on or off and press “INT/OK” key to confirm.
Default Settings
The handsets can be reset to the default settings. In doing so, all the settings which you have changed are returned to their default values. The phone book entries are retained.
Press 
key until the HANDSET menu appears and press “INT/OK” key.
Press 
or 
key to select the submenu and press “INT/OK” key to confirm.
Note: The display will switch back to standby mode.
Key assignment Overview
1 | SPACE, 1 | 7 | P, Q, R, S, 7 |
2 | A, B, C, 2 | 8 | T, U, V, 8 |
3 | D, E, F, 3 | 9 | W, X, Y, Z, 9 |
4 | G, H, I, 4 | 0 | +, |
5 | J, K, L, 5 | * | [, ], U |
6 | M, N, O, 6 | # | ?, :, . |
Registering Additional Handsets
Further handset of the same model can be registered on one base station.
Press 
key until the HANDSET menu appears and press “INT/OK” key.
Press 
or 
key to select the submenu “REGISTER” and press “INT/OK” key.
Handset display shows “SEARCHING”.
Press and hold “page” key on the base station more than 4 seconds until acknowledgement signal is heard.
Enter the PIN (default setting = 0000) and press “INT/OK” key.
Note: After the connection has been established, the name and number of the handset (the next available handset number should be 2) appear in the display.
The base will be ready for registration for 10 minutes when the page key is pressed and hold for more than 4 seconds. After selecting “REGISTER”, the handset starts searching for a base station which is available for registration. The “Aerial” icon starts flashing.
If a base is found, user will be asked to enter the PIN for that base. If the input PIN is correct, the registration procedure will be completed with a confirm tone
11