LCD Display
| Battery icon |
|
|
| Phone icon |
|
|
EXT | External call icon |
INT | Internal call icon |
| CLI icon |
| No ring icon |
|
|
| Mute icon |
| Key lock icon |
Aerial icon
▲/ ▼ Up / Down arrow
Voice mail waiting indicator (VMWI icon)
Using the Handset Telephone
Using the telephone
When the handset is inserted in the station charging unit, it starts to charge automatically. To optimize the battery performance, charge the handset battery for 14 hours prefer to first use.
Note: This phone defaults to Tone Dialing. To change Pulse Dialing, see chapter “Base Station Settings – Changing the Dialing Mode”. If you don’t know which type of service you have, please check with the local telephone company.
Selecting the Language
Ten different languages are available for selection for each handset.
In standby mode, press 
button and “5” key. Current language is displayed.
Press 
or 
as often as necessary to select the required language.
Press “INT/OK” key to confirm the selection.
Note: The following languages are available:
ENGLISH; DEUTSCH; ITALIANO; FRANCAIS; ESPANOL; PORTUGUES; NEDERLANDS; POLSKI; SVENSKA; TURKCE
Making Internal Calls
IMPORTANT: Internal calls can be made only if more than one handset is registered on the base station.
Press “INT/OK” key.
Press the number of the required handset (1….). Carry out the
conversation.
Press 
key to end the call.
Note: If an external call is received during an internal call, short acoustic signals are issued (call waiting).
Making External Calls
Direct dialing
Press 
key and wait for a dialing tone.
Dial the telephone number and complete the call.
7