Press 
or 
key to select the required submenu and press “INT/OK” key.
Press 
or 
key to select the required dialing mode and press “INT/OK” key.
Note: This Flash Time / Dialing mode is used only when dialing from handset. Use the Base switch when dialing from Base.
Changing the PIN
Press 
key until the BASE menu appears and press “INT/OK” key.
Press 
or 
key to select the required submenu and press “INT/OK” key.
Enter old PIN (0000) and press “INT/OK” key. Enter new PIN (e.g. 1111) and press “INT/OK” key.
Enter new PIN again (e.g. 1111) and press “INT/OK” key to confirm.
Default Settings
Press 
key until the BASE menu appears and press “INT/OK” key.
Press 
or 
key to select the required submenu and press “INT/OK” key.
Enter the PIN (factory setting = 0000) and press “INT/OK” key. Press “INT/OK” key to confirm.
Deregister HS
If several handsets are registered on one base station, they can deregister each other mutually. The last handset can not be deregistered.
Press 
key until the BASE menu appears and press “INT/OK” key.
Press 
or 
key to select the required submenu and press “INT/OK” key.
Enter the PIN (factory setting = 0000) and press “INT/OK” key.
If necessary, Use 
or 
key to select the handset and press “INT/OK” key.
Press “INT/OK” key to confirm.
Technical Specifications
Handset Operating Time: | Approx. 10 hours talk time |
| ||
(average values*) | Approx. 100 hours standby |
| ||
AC / DC Adaptor |
|
|
| |
| Input: 230V AC / 50 Hz |
|
| |
| Output: 6V DC, 350mA |
|
| |
| AC | excluding | IT | |
| installations defined by the EN 60950 | |||
| standard. |
|
|
|
| Caution: the network voltage is classified | |||
| as a hazard by the criteria of this | |||
| standard. |
|
|
|
AC / AC Adaptor (for |
|
|
| |
Handset charging) | Input: 230V AC / 50 Hz |
|
| |
| Output: 7V AC, 200mA |
|
| |
| AC | excluding | IT | |
| installations defined by the EN 60950 | |||
| standard. |
|
|
|
| Caution: the network voltage is classified | |||
| as a hazard by the criteria of this | |||
| standard. |
|
|
|
Telephone connection | Appliance designed for connection to an | |||
| analogue telephone line class TNV3 | |||
| (telecommunications network voltage) as | |||
| defined by the EN 60950 standard. |
| ||
Rechargeable Battery | GP60AAAHC, 1.2V / 600mAh / | |||
| AAA x 2 or equivalent |
|
| |
Operating Temperature: | 0 to 45 oC |
|
|
|
* For guidance only, depends on initial battery charge.
13