Press 
key to end the call.
On hook dialing
Dial the telephone number (delete any incorrect entries by pressing “C” key).
Press 
key to carry out the conversation.
Press 
key to end the call.
VMWI/LED
The VMWI/LED in the handset will flash when there are new voice
message calls received. Icon 
turns on and the LCD display “Message” in the call log memory.
This service need subscription to local operator and it supports the FSK CLI system only.
Taking Calls
When an external call is received, all registered handsets and the base station ring. EXT flashes in the handset display and, if configured, the telephone number of the caller appears (network depended). If the caller has been entered in your phone book, the name appears. The incoming call VMWI/LED on the base station flashes. In the case of an internal call or on pressing the paging key on the base station, INT flashes in the handset display.
Handset is in the base station
Take the handset from the base station; a connection is automatically established (when the AUTO ANS function is
active). Otherwise, press 
key. Carry out the conversation.
Press 
key to end the call.
Handset is not in the base station
Press 
key. Carry out the conversation.
Press 
key to end the call.
Redialing
The phone stores the last five numbers dialled in the redial memory
Press 
key; the last call number dialed is displayed. Press
or 
key to search the required number in the redial memory list.
Press 
key to carry out the conversation.
Press 
key to end the call.
Dialing from the Phone Book
Press key; the first entry in the phone book appears. (Or “MEM EMPTY” if no entry)
Press 
or 
key to select the required subscriber from the phone book. Alternatively, enter the first letter of the name required.
Press | key. The number is dialed. Carry out the |
conversation. |
|
Note: How to store entries in the phone book is explained in the Chapter “Phone Book”.
Call Log Operations
IMPORTANT: To use the “Call Log” function, you must subscribe to your network operator’s Caller Line Identification (CLI) service.
Browse, Call Back, Delete, Save
If calls have been received in your absence, these are stored in the CALL LOG memory when your telephone service has enabled this function. The number of calls appears in the display. Incoming calls are also indicated in the display for 10 seconds during a call.
Press 
key as often as necessary until CALL LOG menu
appears. Alternatively, press and hold “*” key. Then press “INT/OK” key.
8