Base Station Settings Using the Handset | GE FS21828 specification

Base Station Settings

(using the Handset)

Barring Calls

The following options are available for selection for barring calls:

Option	Description
DISABLE	All telephone calls are possible.
EXTERNAL	All external calls are barred.
NUMBER	Define a number which should be barred, e.g. 0190

Press key until the BASE menu appears and press “INT/OK” key.

Press or key to select the required submenu and press “INT/OK” key.

Enter the PIN (factory setting is 0000) and press “INT/OK” key.

Use or key to select the handset which should be barred and press “INT/OK” key.

Use or key to select an option and press “INT/OK” key.

Entering/Changing Emergency Number

Emergency numbers are free of any restriction, i.e. they can still be called even if call barring of any kind is set.

Before emergency numbers can be used, they must be stored. The emergency numbers can then be dialed manually or from the phone book if they are stored there.

Two different emergency numbers (maximum of five digits) can be programmed. Example: three digit emergency number = 123. All numbers which begin with 123 are dialed even if the unit is only programmed for internal calls.

Press key until the BASE menu appears and press “INT/OK” key.

Press or key to select the required submenu and press “INT/OK” key.

Enter the PIN (factory setting = 0000) and press “INT/OK” key.

Use or key to select the emergency number to be changed and change it.

Press “INT/OK” key.

Note: Save the emergency numbers in the phone book, too (refer to chapter “Phone Book”), e.g. with self explanatory names such as “Doctor” or “Fire”. If these numbers should be positioned at the top of the phone book list in the display, enter a space preceding the name “DOC” and “FIRE”.