GE 28851 manual De-Registration

Registration

Your packaged handset(s) are pre-registered and ready to use. It is not recommended that a handset be registered again unless absolutely necessary.

From the Handset Setup Menu:

1.Press the CALLER ID-VOLUME(6 or 5) button to scroll to the REGISTRATION sub-menu.

2.Press the mute/menu OK/program button to enter the menu. The screen displays REGISTRATION 1YES42NO. The default setting is 2NO.

3.Use the touch-tone pad to select 1 for YES or 2 for NO. Or use the CALLER ID-VOLUME(6 or 5) button to scroll to 1YES or 2NO.

4.If you select 1YES, press the mute/menu OK/program button. The screen displays HOLD BASE PAGE FOR 5 SECONDS, THEN PRESS HANDSET PROGRAM. (Your handset should be held near the base during registration process.)

5.Press and hold the find button on the base unit, the charge/in use voicemail indicator flashes. Press the handset mute/menu OK/program button. The screen displays REGISTERING. The screen will then display REGISTERED. You may now rename your handset. (Refer to Step 3 & 4 of Handset Name Section)

NOTE: IF you are re-registering the handset through the handset menu; to rename your handset you must go to the Handset Name Section and start from the beginning step.

De-Registration

De-registration cancels registration. During the de-registration process, keep the handset near the base.

From the Handset Setup Menu:

1.Press the CALLER ID-VOLUME(6 or 5) button to scroll to the DEREGISTRATION sub-menu.

2.Press the mute/menu OK/program button to enter the menu. The screen displays DEREGISTRATION 1YES42NO. The default setting is "2NO".

3.Use the touch-tone pad to select 1 for YES or 2 for NO. Or use the CALLER ID-VOLUME(6 or 5) button to scroll to 1YES or 2NO.

WARNING: It is not recommended that a handset be de- registered unless absolutely necessary because once a handset is de-registered, that handset’s telephone features cannot be used until the handset is re-registered.

30