GE 28851 manual Global De-registration, Default Setting

4.Select 2NO, if you do not want to de-register.

5.If you select 1YES, press the mute/menu OK/program button and MOVE NEAR TO BASE displays for 2 seconds, then CONFIRM? 1YES 2NO appears in the display.

6.Press the touch-tone pad to select 1YES or 2NO, or use the CALLER ID-VOLUME(6 or 5) button to scroll to 1YES or 2NO.

7.If you select YES, press the mute/menu OK/program button to confirm. DE-The screen displays REGISTER.... You will hear a confirmation tone. Then the screen displays DEREGISTERED to confirm the handset is deregistered.

NOTE: When you complete the de-registration process, The screen displays HANDSET NEEDS REGISTRATION. To use the handset, you MUST re-register the handset using the Registration process.

Global De-registration

If one or more handsets becomes lost, you should de-register all handsets to ensure proper system operation.

WARNING: It is not recommended that a handset be de- registered unless absolutely necessary because once a handset is de-registered, that handset’s telephone features cannot be used until the handset is re-registered.

1.Disconnect power from the base by pulling the plug out of the back of the unit.

2.Press and hold the find button and while holding the find button reconnect the power.

3.Continue to hold the find button until the charge/in use voicemail light flashes rapidly.

4.Release the find button.

5.Press and release the find button on the base once. All handsets are de-registered and the screen displays HANDSET NEEDS REGISTRATION.

Default Setting

As you become familiar with this system, you may prefer to use the system’s original settings. Follow the steps below to return to the factory default settings.

From the Handset Setup Menu:

1.Press the CALLER ID-VOLUME(6 or 5) button to scroll to the DEFAULT SETTING sub-menu.

31