GE 28851 manual Changing the Battery, Battery Safety Precautions

Page 50

Changing the Battery

CAUTION: To reduce the risk of fire or personal injury, use only the Thomson Inc. approved Model 5-2814 Nickel-metal Hydride battery (Ni-MH), which is compatible with this unit.

1.Make sure the telephone is OFF (not in TALK mode) before you replace the battery.

2.Remove the battery compartment door.

3.Disconnect the battery plug from the jack inside the battery compartment and remove the battery pack from the handset.

4.Insert the new battery pack and connect the cord to the jack inside the battery compartment.

5.Put the battery compartment door back on.

6.Place handset in the base or handset charge cradle to charge. Allow the handset battery to properly charge (for 16 hours) prior to first use or when you install a new battery pack. If you do not properly charge the phone, battery performance will be compromised.

Battery Safety Precautions

•Do not burn, disassemble, mutilate, or puncture. Like other batteries of this type, toxic materials could be released which can cause injury.

•To reduce the risk of fire or personal injury, use only the Nickel-metal Hydride battery listed in the User’s Guide.

•Keep batteries out of the reach of children.

•Remove batteries if storing over 30 days.

NOTE: The RBRC seal on the battery used in your Thomson Inc. product indicates that we are participating in a program to collect and recycle the rechargeable battery (or batteries).

For more information go to the RBRC web site at www.rbrc.org or call 1-800-8-BATTERY or contact a local recycling center.

50

Image 50

Contents Page Equipment Approval Information Notification to the Local Telephone CompanyInterference Information Rights of the Telephone CompanyFCC RF Radiation Exposure Statement Hearing Aid Compatibility HACLicensing Information for Dect ProductTable of Contents Another Location Introduction Before You BeginTelephone Jack Requirements Digital Security System InstallationImportant Installation Guidelines Handset Layout DisplayBase Layout PLAY/STOPInstalling the Phone Installing the Handset BatteryBase Station Answerer Answering System SetupHandset Access Set Prompt Language Rings to AnswerSecurity Code Speaker VolumeMessage Alert Reviewing and Choosing the Announcement Voice InstructionRecording the Outgoing Announcement GOOG411 Programming Functions Programming the TelephoneStandby Screen Phone BookAdd Records Inserting a Pause in the Dialing Sequence of a Stored NumberEdit Records Delete RecordsRoom Monitor applicable only with additional handsets Dialing a Number from Internal MemoryIgnore The Incoming Call Set Alarm Clock Handset Name Handset SetupLanguage Ringer Volume Ringer ToneVIP Melody Storing VIP MelodyKey Tone Changing a Stored VIP Melody RecordReviewing And Deleting Stored VIP Melody Record Set Day/Time EqualizerArea Code Tone/PulseRegistration De-RegistrationDefault Setting Global De-registrationTelephone Operation Visual IndicatorsVmwi / Visual Ringer Indicator on Handset BaseAnswering Calls Speakerphone OperationMaking a Call Auto Standby Call TimerRinger Volume Shortcut Flash/Call WaitingLast Number Redial ExitPaging from the Base/Group Handset to Handset PagingPaging All Handsets from a Handset Applicable only with additional handsetsDo Not Disturb D-N-D Receiver Volume ControlMute Receiving an Intercom Call Intercom OperationMaking an Intercom Call Receiving an Incoming Call During an Intercom Call Advanced Intercom FeaturesUsing Intercom with External Telephone Calls Two-Way CallingCaller ID CID Transferring External Calls to Other HandsetsStoring CID Records In CID Memory Call Waiting Caller IDReceiving CID Records Reviewing CID RecordsDialing a CID Number Storing CID Records in Internal MemoryDeleting a CID Record Deleting All CID RecordsLeaving a Message/Memo Message Counter IndicatorAnswering System Operation Memory Full Screening Calls from the BaseMessage Playback Erasing Messages To erase a message while it is playingScreening Calls from the Handset Remote AccessCordless Handset Accessing the Answering System from Another Location Press this buttonBelt Clip and Optional Headset Connecting the Belt ClipConnecting an Optional Headset to the Handset Changing the Battery Battery Safety PrecautionsDisplay Messages ChargingRegistration Handset Sound Signals Answering System Display MessagesTroubleshooting Guide Telephone SolutionsCaller ID Solutions Battery SolutionsAnswering System Solutions Causes of Poor Reception General Product CareWarranty Assistance Thomson Inc Manager, Consumer Relations Box Indianapolis,Limited Warranty What we will doIf you purchased your product outside the USA Index GOOG411Inserting a Pause in the Dialing Sequence Accessory Information Description Model noThomson Inc