GE 28213 manual Alarm Clock, Daily

5.Use the touch tone pad to enter the handset name/number to be monitored.

NOTE: When this phone system is expanded (up to 6 handsets by purchase of optional Model 28203 handset with recharge cradle), handsets are named HANDSET 1, HANDSET 2, HANDSET 3 and so on respectively.

6.The receiving handset will turn on the microphone and the originating handset will turn on the speakerphone to monitor sound from the receiving handset.

NOTE: For room monitoring mode to work, the originating handset must NOT be on the cradle.

NOTE: While in room monitoring mode, the handsets will emit an alert tone approximately every 5 seconds if there is an incoming call. You may press the TALK/SPEAKER button to quit room monitor and answer the call.

NOTE: While in room monitoring mode, the originating handset can be switched to monitor by handset earpiece by pressing the TALK/SPEAKER button once. Switch back to speakerphone by pressing the TALK/SPEAKER button once.

NOTE: Press the END button on the handset to exit room monitor mode.

Alarm Clock

1.Make sure your phone is OFF (not in TALK mode)

2.Press the mute/menu OK button to go to the main menu.

3.Use the caller ID-volume(5 or 6) button to scroll to ALARM CLOCK.

4.Press mute/menu OK button to enter the menu. The screen displays ON > OFF.

5.Use the caller ID-volume(5 or 6) button to select ON or OFF. Press mute/menu OK button to confirm.

6.If ON is selected, then the screen displays SET ALARM TIME. Use the number keys to enter the alarm time (for example, 02:10PM) key in 0210. Use the

caller ID-volume(5 or 6) button to select AM or PM.

7.Press mute/menu OK button to display >ONCE OR DAILY and select ONCE or

DAILY.

8.Press the mute/menu ok button to save selection. You will hear a confirmation tone and return to main menu.

15