GE 28213 manual Date and Time, Area Code, Tone/Pulse

Date and Time

From the Initial Setup Menu:

1.Press the caller ID-volume(5 or 6) button to scroll to the DATE and TIME sub-menu.

2.Press mute/menu OK button to enter the menu. Use the number keys to enter the current date, (for example, 31 December, 2007) key in 071231.

3.Press mute/menu OK button to confirm your selection and advance SET TIME sub-menu.

4.Use the number keys to enter the current hour and minute, then use the caller ID-volume(5 or 6) to select AM or PM.

5.Press the mute/menu OK button to save your selection. You will hear a confirmation tone and the current time shows in the display.

Area Code

From the Initial Setup Menu:

1.Press the caller ID-volume(5 or 6) button to scroll to the AREA CODE sub-menu.

2.Press mute/menu OK button to enter the menu. The screen displays SET AREA CODE - - - .

3.Use the touch-tone pad to enter your 3-digit area code.

4.Press the mute/menu OK button to confirm. You will hear a confirmation tone and the new area code shows in the display.

NOTE: To restore the default setting to - - -, press and release delete/int/conf when SET AREA CODE shows in the display.

Tone/Pulse

From the Initial Setup Menu:

1.Press the caller ID-volume(5 or 6) button to scroll to the TONE/PULSE sub-menu.

2.Press mute/menu OK button to enter the menu. The screen displays 4TONE PULSE. The default setting is TONE.

3.Use the caller ID-volume(5 or 6) to select TONE or PULSE.

4.Press the mute/menu OK button to confirm. You will hear a confirmation tone and your selection shows in the display.

17