GE 28213 manual Global De-registration, Ringer Tone, From the Sound Setup Menu

Page 20

Global De-registration

If one or more handsets become lost, you should de-register all handsets to ensure proper system operation.

WARNING: It is not recommended that a handset be de-registered unless absolutely necessary because once a handset is de-registered, that handset’s telephone features cannot be used until the handset is re-registered.

1.Disconnect power from the base by pulling the plug out of the back of the unit.

2.Press and hold the find button and while holding the find button reconnect the power.

3.Continue to hold the find button until the charge/in use light flashes rapidly.

4.Release the find button.

5.Press and release the find button on the base once. All handsets are de-registered and the screen displays HANDSET NEEDS REGISTRATION.

Sound Setup

1.Make sure your phone is OFF (not in TALK mode).

2.Press the mute/menu OK button to go to the main menu.

3.Press caller ID-volume(5 or 6) button to scroll to SOUND SETUP.

4.Press mute/menu OK button to confirm and you may program the following items: Ringer Tone, Ringer Volume, Key Tone.

Ringer Tone

You may choose from five different ringer tones and five different melodies.

From the Sound Setup Menu:

1.Press the caller ID-volume(5 or 6) button to scroll to the RINGER TONE sub-menu.

2.Press mute/menu OK button to enter the menu. The screen displays 4 1 OF 10. 01 is default setting.

3.Use the caller ID-volume(5 or 6) button to scroll to the desired setting (1 through 10). You will hear a sample of the ringer tone/melody you select.

4.Press the mute/menu OK button to save your selection. You will hear a confirmation tone and the selected ringer tone shows in the display.

20

Image 20

Contents Page Important Information Interference InformationTelephone Network Information REN NumberHearing Aid Compatibility HAC LicensingFCC RF Radiation Exposure Statement Information for Dect ProductTable of Contents Battery Safety Precautions Parts Checklist for 28213xx1 model IntroductionBefore You Begin BaseInstallation Telephone Jack RequirementsDigital Security System Wall plateImportant Installation Guidelines Base Layout Front ViewSignal strength Message Battery VoicemailHandset Layout Display IconsInstalling the Phone Installing the Handset BatteryBase Station Programming Functions Programming the TelephoneStandby Screen Alarm Clock DailyHandset Name Initial SetupFrom the Initial Setup Menu Tone/Pulse Date and TimeArea Code Registration LanguageAuto Talk De-Registration Sound Setup From the Sound Setup MenuGlobal De-registration Ringer ToneKey Tone Reset SettingRinger Volume Visual Indicators All SettingsTelephone Operation VoicemailVmwi / Visual Ringer Indicator on Handset HandsetSpeakerphone Operation Making a CallCall Timer Ringer Volume ShortcutAuto Standby Answering CallsFlash/Call Waiting Last Number RedialExit Press the redial/format button. -ORReceiver Volume Control Paging from the Base/GroupMute Do Not Disturb D-N-DApplicable only with additional handsets Intercom OperationMaking an Auto Intercom Call Advanced Intercom Features Using Intercom with External Telephone CallsReceiving an Incoming Call During an Intercom Call Two-Way CallingTransferring External Calls to Other Handsets Caller ID CIDCall Waiting Caller ID Receiving CID RecordsStoring CID Records In CID Memory Reviewing CID RecordsDialing a CID Number Storing CID Records in Internal MemoryEleven digits Ten digitsDeleting a CID Record Deleting All CID RecordsPhonebook Review RecordsAdd Records From Phonebook Sub-MenuEdit Records Delete RecordsDialing a Number from Internal Memory Changing the Battery Battery Safety PrecautionsDisplay Messages Indicates the battery needs to be charged Indicates the handset is in speakerphone modeProvider ReviewedCordless Phone Solutions Troubleshooting GuideCaller ID Solutions Battery Solutions Causes of Poor Reception General Product CareWarranty Accessory Information Index Receiving an Incoming Call During an Model