GE 28213 manual Telephone Operation, Visual Indicators, Voicemail, All Settings, Base

Page 22

Voicemail

From the Reset Settings Menu:

1.Press the caller ID-volume(5 or 6) button to scroll to the VOICEMAIL sub-menu.

2.Press the mute/menu OK button to enter the menu. The screen displays 4YES NO. The default setting is NO.

3.Use the caller ID-volume(5 or 6) button to move the cursor to YES or NO.

NOTE: If YES is selected, new voicemail icon is cleared from the LCD and the VMWI LED is turned OFF (on ALL handsets, and the charge/in use LED on the base).

4.Press the mute/menu OK button to save your selection. You will hear a confirmation tone.

All Settings

As you become familiar with this system, you may prefer to use the system’s original settings. Follow the steps below to return to the factory default settings.

From the Reset Settings Menu:

1.Press the caller ID-volume(5 or 6) button to scroll to the ALL SETTINGS sub-menu.

2.Press the mute/menu OK button to enter the menu. The screen displays YES4NO. The default setting is NO.

3.Use the caller ID-volume(5 or 6) button to move the cursor to YES or NO.

NOTE: If you choose YES all the settings in the programmable menu are returned to factory default setting.

4.Press the mute/menu OK button to save your selection. You will hear a confirmation tone.

Telephone Operation

Visual Indicators

Base

The charge/in use indicator on the base will flash to alert you to an incoming call, during paging, or if you have a message waiting from your service provider. The indicator will remain lit when a handset is in the base charging or when the line is in use.

22

Image 22

Contents Page Important Information Interference InformationHearing Aid Compatibility HAC Telephone Network InformationREN Number LicensingFCC RF Radiation Exposure Statement Information for Dect ProductTable of Contents Battery Safety Precautions Before You Begin Parts Checklist for 28213xx1 modelIntroduction BaseDigital Security System InstallationTelephone Jack Requirements Wall plateImportant Installation Guidelines Base Layout Front ViewHandset Layout Signal strengthMessage Battery Voicemail Display IconsInstalling the Phone Installing the Handset BatteryBase Station Standby Screen Programming the TelephoneProgramming Functions Alarm Clock DailyFrom the Initial Setup Menu Initial SetupHandset Name Area Code Date and TimeTone/Pulse Auto Talk LanguageRegistration De-Registration Global De-registration Sound SetupFrom the Sound Setup Menu Ringer ToneRinger Volume Reset SettingKey Tone Telephone Operation Visual IndicatorsAll Settings VoicemailSpeakerphone Operation Vmwi / Visual Ringer Indicator on HandsetHandset Making a CallAuto Standby Call TimerRinger Volume Shortcut Answering CallsExit Flash/Call WaitingLast Number Redial Press the redial/format button. -ORMute Receiver Volume ControlPaging from the Base/Group Do Not Disturb D-N-DMaking an Auto Intercom Call Intercom OperationApplicable only with additional handsets Receiving an Incoming Call During an Intercom Call Advanced Intercom FeaturesUsing Intercom with External Telephone Calls Two-Way CallingTransferring External Calls to Other Handsets Caller ID CIDStoring CID Records In CID Memory Call Waiting Caller IDReceiving CID Records Reviewing CID RecordsEleven digits Dialing a CID NumberStoring CID Records in Internal Memory Ten digitsDeleting a CID Record Deleting All CID RecordsAdd Records PhonebookReview Records From Phonebook Sub-MenuEdit Records Delete RecordsDialing a Number from Internal Memory Changing the Battery Battery Safety PrecautionsDisplay Messages Provider Indicates the battery needs to be chargedIndicates the handset is in speakerphone mode ReviewedCaller ID Solutions Troubleshooting GuideCordless Phone Solutions Battery Solutions Causes of Poor Reception General Product CareWarranty Accessory Information Index Receiving an Incoming Call During an Model