GE 800-EFM manual Wiring Block

Installing Your Door Intercom Adapter

Step 4: Connect Wiring Block to Door Intercom Adapter

1 Locate 8-wire Cord

Find the 8-wire cord which was enclosed with your Door Intercom Adapter. Note that this is a black cord which is approximately 6 inches long.

Note that you must use this cord, as any other cord may not work.

2 Connect Cord to Feature Module

Plug one end of the 8-wire cord into the jack on the back of the feature module labeled “TO

WIRING BLOCK.”

3 Connect other end of Cord to Wiring Block

Plug the other end of the 8-wire cord into the wiring block which was supplied with your fea- ture module.

17