Installing Your Door Intercom Adapter
Step 7: Connect Magnetic Door Strike to Wiring Block (Optional)
1 Install Magnetic Door Strike
Please follow the installation instructions that came with your magnetic door strike.
Note that TMC Corporation does not manufac- ture magnetic door strikes. The Door Intercom Adapter has been designed and tested to be compatible with industry standard magnetic door strikes, which are also called magnetic door locks. Nutone is one example of a com- pany that supplies magnetic door strikes.
2 Connect Magnetic Strike Wires to 12- Volt Supply and to Wiring Block
Connect one magnetic strike wire to one of the indicated screw terminals on the wiring block. Note that these are the terminals with the yel- low wire and the green wire.
Connect the other magnetic strike wire to one terminal of a
Last, connect a wire from the other terminal of the
PLEASE NOTE THAT YOU MUST CONNECT A
20